Siemens
The following Siemens courses are available.
 
S5 to S7 Upgrade, S7 200 S7 1200 (TIA)
S5 Intro S5 Basic, S5 Advanced, S5 Maintenance S5 Networking
TIA Upgrade, TIA Basic, TIA Advanced,
S7 Intro S7 Basic, S7 Advanced, S7 Safety, S7 Graph, S7 Maintenance S7 Comms
WinCC, WinCC Flexible, ProTool/Operator Panels
MicroMaster G120 S120
Certified Profibus Training
S7-200 Duration 2-3 days
Introduction to PLC’s
Basic principles of an S7-200 PLC including PSU, CPU, digital I/O, analogue I/O.
Siemens Terminology
Description of bits, bytes, words, memories, data elements, addressing etc.
Getting started with MicroWin32
Configuring and using MicroWin32
Configuring hardware and networks
Working with Symbols
Working with program elements
Program structure
Binary and Digital Operations
 
Timers
Counters
 
Data storage in data blocks
 
Using Organisation Blocks
Using tools to fault find
 
Saving the program
 
Documentation
 
The course can be presented over 2 or 3 days depending on previous experience using S7 PLCs.
   
All topics are reinforced with practical exercises throughout the course.
S7-1200 (TIA) Duration 2-3 days
Introduction to PLC’s
Basic principles of an S7-1200 PLC including PSU, CPU, digital I/O, analogue I/O.
Siemens Terminology
Description of bits, bytes, words, memories, data elements, addressing etc.
Getting started with Simatic Manager
Configuring and using Simatic Manager
Configuring hardware and networks
Working with Symbols
Working with program elements
Program structure
Binary and Digital Operations
 
Data storage in data blocks
 
Using Organisation Blocks
Using tools to fault find
 
Introduction to HMI Systems
 
Saving the program
 
Documentation
 
The course can be presented over 2 or 3 days depending on previous experience using S7 PLCs and WinCC Flexible software.
   
All topics are reinforced with practical exercises throughout the course.